Auxiliary Unit Mapping Instructions
1. Hardware Connection
Use Ethernet cables to connect each unit or board sequentially in a daisy-chain configuration.
2. Software Mapping
2.1 Average Mapping
On the main interface, right-click the channel area, then select [Reset mapping] to begin configuring the auxiliary channel mapping.
Select [Average mapping] to distribute the auxiliary channels evenly across all available main channels.
Save the mapping. The assigned auxiliary channels will then appear under their corresponding main channels.
2.2 Custom Mapping
Drag the desired auxiliary channel and drop it under the corresponding main channel to assign the mapping.
If more than 16 auxiliary channels are required, double-click the main channel to expand the mapping area and configure additional auxiliary channels.
Save the mapping. The assigned auxiliary channels will then appear under their corresponding main channels.