Neware Battery Testing Equipment
BTS-4008Q-5V6A-S1-W
An 8-channel, 5 V / 6 A battery testing system designed for pouch, cylindrical, and other cell formats used in battery R&D and consumer electronics. With four current ranges from 0.5 mA to 6 A, it supports formation and grading, capacity and cycle-life testing, rate-performance evaluation, GITT, DCIR, and coulombic-efficiency analysis
Key Capabilities
High Precision
±0.02% FS
current accuracy
Four Current Ranges
0.5 mA to 6 A wide
dynamic range
Low Leakage Current
0.005 μA leakage for
sensitive long-duration tests
Fast Response
≤1 ms current response for
pulse measurements
Independent Channels
8 independent channels
with 4-wire Kelvin connections
Flexible Test Control
Supports GITT, pulse, DCIR &
programmable cycling
Compatible Battery and Applications
Main Battery Types
Cylindrical Cell
Pouch Cell
Test Applications
Grading
Evaluation
Testing
Capability
Efficiency
Testing
Testing
Analysis
Technical Specifications
| Model | BTS-4008Q-5V6A-S1-W |
|---|---|
| Input AC | AC 110–220 V ±10%, 50–60 Hz |
| Voltage Range | CV output: 25 mV–5 V Minimum discharge voltage: 1.0 V between cylindrical holder, 1.5 V for 2.0m cables |
| Voltage Accuracy | ±0.02% of full scale |
| Current Range per Channel | R1: 0.5 mA–100 mA R2: 100 mA–500 mA R3: 500 mA–3 A R4: 3 A–6 A |
| Current Accuracy | ±0.02% of full scale |
| Current Response Time | ≤1 ms |
| Data Recording Frequency | 10 Hz |
| Minimum Recording Interval | 100 ms |
| Minimum Pulse Width | 500 ms |
| Output Power per Channel | 30 W |
Recommended Add-on Unit
VOLTAGE & TEMPERATUE
CA-4008n-1U-5VT-TC-DB25
Adds synchronized voltage and temperature
monitoring to battery tests.
· Voltage input： 8 channels
· Temperature input: 8 channels
TEMPERATUE
CA-4032n-1U-T-TC-DB25
Adds high-channel-count temperature
monitoring to battery tests.
· Temperature input: 8 channels
· Connector: DB25
Configure for Quotation
Aftersales Resources
Everything needed to install, operate and maintain your system.